{
  "format": "bridge-geometry-checks/0.1",
  "building": "kai-iwi",
  "geometry_accuracy_established": false,
  "status": "review-required",
  "checks": [
    {
      "id": "overall-length",
      "label": "Span chain against handrail overall dimension",
      "category": "dimension",
      "measured": 51.67630000000001,
      "expected": 51.6763,
      "error": 1.4210854715202004e-14,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "length-check"
      ]
    },
    {
      "id": "deck-width-1",
      "label": "Span 1 transverse width against general section",
      "category": "dimension",
      "measured": 9.3472,
      "expected": 9.3472,
      "error": 0.0,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "width-check"
      ]
    },
    {
      "id": "deck-length-1",
      "label": "Span 1 slab segment against deck detail",
      "category": "dimension",
      "measured": 17.081500000000002,
      "expected": 17.081500000000002,
      "error": 0.0,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "slab-length-check"
      ]
    },
    {
      "id": "beam-count-1",
      "label": "Span 1 beam count against general section",
      "category": "dimension",
      "measured": 8,
      "expected": 8,
      "error": 0,
      "tolerance": 0,
      "unit": "count",
      "status": "pass",
      "evidence": [
        "width-check"
      ]
    },
    {
      "id": "joint-1",
      "label": "Joint at pier 1",
      "category": "dimension",
      "measured": 0.01905000000000001,
      "expected": 0.01905,
      "error": 1.0408340855860843e-17,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "slab-length-check"
      ]
    },
    {
      "id": "deck-width-2",
      "label": "Span 2 transverse width against general section",
      "category": "dimension",
      "measured": 9.3472,
      "expected": 9.3472,
      "error": 0.0,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "width-check"
      ]
    },
    {
      "id": "deck-length-2",
      "label": "Span 2 slab segment against deck detail",
      "category": "dimension",
      "measured": 17.081500000000005,
      "expected": 17.081500000000002,
      "error": 3.552713678800501e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "slab-length-check"
      ]
    },
    {
      "id": "beam-count-2",
      "label": "Span 2 beam count against general section",
      "category": "dimension",
      "measured": 8,
      "expected": 8,
      "error": 0,
      "tolerance": 0,
      "unit": "count",
      "status": "pass",
      "evidence": [
        "width-check"
      ]
    },
    {
      "id": "joint-2",
      "label": "Joint at pier 2",
      "category": "dimension",
      "measured": 0.01905000000000001,
      "expected": 0.01905,
      "error": 1.0408340855860843e-17,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "slab-length-check"
      ]
    },
    {
      "id": "deck-width-3",
      "label": "Span 3 transverse width against general section",
      "category": "dimension",
      "measured": 9.3472,
      "expected": 9.3472,
      "error": 0.0,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "width-check"
      ]
    },
    {
      "id": "deck-length-3",
      "label": "Span 3 slab segment against deck detail",
      "category": "dimension",
      "measured": 17.0815,
      "expected": 17.081500000000002,
      "error": 3.552713678800501e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "slab-length-check"
      ]
    },
    {
      "id": "beam-count-3",
      "label": "Span 3 beam count against general section",
      "category": "dimension",
      "measured": 8,
      "expected": 8,
      "error": 0,
      "tolerance": 0,
      "unit": "count",
      "status": "pass",
      "evidence": [
        "width-check"
      ]
    },
    {
      "id": "S1-diaphragm-station-0",
      "label": "S1 beam diaphragm station chain term 1",
      "category": "source-dimension",
      "measured": 4.19735,
      "expected": 4.19735,
      "error": 0.0,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S1-diaphragm-station-1",
      "label": "S1 beam diaphragm station chain term 2",
      "category": "source-dimension",
      "measured": 4.267200000000001,
      "expected": 4.2672,
      "error": 8.881784197001252e-16,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S1-diaphragm-station-2",
      "label": "S1 beam diaphragm station chain term 3",
      "category": "source-dimension",
      "measured": 4.267200000000001,
      "expected": 4.2672,
      "error": 8.881784197001252e-16,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S1-diaphragm-station-3",
      "label": "S1 beam diaphragm station chain term 4",
      "category": "source-dimension",
      "measured": 4.19735,
      "expected": 4.19735,
      "error": 0.0,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S2-diaphragm-station-0",
      "label": "S2 beam diaphragm station chain term 1",
      "category": "source-dimension",
      "measured": 4.19735,
      "expected": 4.19735,
      "error": 0.0,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S2-diaphragm-station-1",
      "label": "S2 beam diaphragm station chain term 2",
      "category": "source-dimension",
      "measured": 4.2672000000000025,
      "expected": 4.2672,
      "error": 2.6645352591003757e-15,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S2-diaphragm-station-2",
      "label": "S2 beam diaphragm station chain term 3",
      "category": "source-dimension",
      "measured": 4.267199999999999,
      "expected": 4.2672,
      "error": 8.881784197001252e-16,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S2-diaphragm-station-3",
      "label": "S2 beam diaphragm station chain term 4",
      "category": "source-dimension",
      "measured": 4.197350000000004,
      "expected": 4.19735,
      "error": 3.552713678800501e-15,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S3-diaphragm-station-0",
      "label": "S3 beam diaphragm station chain term 1",
      "category": "source-dimension",
      "measured": 4.19735,
      "expected": 4.19735,
      "error": 0.0,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S3-diaphragm-station-1",
      "label": "S3 beam diaphragm station chain term 2",
      "category": "source-dimension",
      "measured": 4.2672000000000025,
      "expected": 4.2672,
      "error": 2.6645352591003757e-15,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S3-diaphragm-station-2",
      "label": "S3 beam diaphragm station chain term 3",
      "category": "source-dimension",
      "measured": 4.267199999999995,
      "expected": 4.2672,
      "error": 4.440892098500626e-15,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S3-diaphragm-station-3",
      "label": "S3 beam diaphragm station chain term 4",
      "category": "source-dimension",
      "measured": 4.19735,
      "expected": 4.19735,
      "error": 0.0,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-diaphragm-stations",
        "beam-length"
      ]
    },
    {
      "id": "S1-beam-1-flange-width",
      "label": "S1-beam-1 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-1-flange-depth",
      "label": "S1-beam-1 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-1-web-height",
      "label": "S1-beam-1 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-2-flange-width",
      "label": "S1-beam-2 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-2-flange-depth",
      "label": "S1-beam-2 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-2-web-height",
      "label": "S1-beam-2 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-3-flange-width",
      "label": "S1-beam-3 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-3-flange-depth",
      "label": "S1-beam-3 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-3-web-height",
      "label": "S1-beam-3 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-4-flange-width",
      "label": "S1-beam-4 top flange width",
      "category": "source-dimension",
      "measured": 0.30480000000000007,
      "expected": 0.3048,
      "error": 5.551115123125783e-17,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-4-flange-depth",
      "label": "S1-beam-4 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-4-web-height",
      "label": "S1-beam-4 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-5-flange-width",
      "label": "S1-beam-5 top flange width",
      "category": "source-dimension",
      "measured": 0.30480000000000007,
      "expected": 0.3048,
      "error": 5.551115123125783e-17,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-5-flange-depth",
      "label": "S1-beam-5 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-5-web-height",
      "label": "S1-beam-5 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-6-flange-width",
      "label": "S1-beam-6 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-6-flange-depth",
      "label": "S1-beam-6 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-6-web-height",
      "label": "S1-beam-6 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-7-flange-width",
      "label": "S1-beam-7 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-7-flange-depth",
      "label": "S1-beam-7 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-7-web-height",
      "label": "S1-beam-7 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-8-flange-width",
      "label": "S1-beam-8 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-8-flange-depth",
      "label": "S1-beam-8 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S1-beam-8-web-height",
      "label": "S1-beam-8 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-1-flange-width",
      "label": "S2-beam-1 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-1-flange-depth",
      "label": "S2-beam-1 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-1-web-height",
      "label": "S2-beam-1 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-2-flange-width",
      "label": "S2-beam-2 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-2-flange-depth",
      "label": "S2-beam-2 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-2-web-height",
      "label": "S2-beam-2 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-3-flange-width",
      "label": "S2-beam-3 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-3-flange-depth",
      "label": "S2-beam-3 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-3-web-height",
      "label": "S2-beam-3 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-4-flange-width",
      "label": "S2-beam-4 top flange width",
      "category": "source-dimension",
      "measured": 0.30480000000000007,
      "expected": 0.3048,
      "error": 5.551115123125783e-17,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-4-flange-depth",
      "label": "S2-beam-4 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-4-web-height",
      "label": "S2-beam-4 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-5-flange-width",
      "label": "S2-beam-5 top flange width",
      "category": "source-dimension",
      "measured": 0.30480000000000007,
      "expected": 0.3048,
      "error": 5.551115123125783e-17,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-5-flange-depth",
      "label": "S2-beam-5 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-5-web-height",
      "label": "S2-beam-5 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-6-flange-width",
      "label": "S2-beam-6 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-6-flange-depth",
      "label": "S2-beam-6 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-6-web-height",
      "label": "S2-beam-6 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-7-flange-width",
      "label": "S2-beam-7 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-7-flange-depth",
      "label": "S2-beam-7 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-7-web-height",
      "label": "S2-beam-7 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-8-flange-width",
      "label": "S2-beam-8 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-8-flange-depth",
      "label": "S2-beam-8 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S2-beam-8-web-height",
      "label": "S2-beam-8 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-1-flange-width",
      "label": "S3-beam-1 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-1-flange-depth",
      "label": "S3-beam-1 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-1-web-height",
      "label": "S3-beam-1 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-2-flange-width",
      "label": "S3-beam-2 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-2-flange-depth",
      "label": "S3-beam-2 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-2-web-height",
      "label": "S3-beam-2 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-3-flange-width",
      "label": "S3-beam-3 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-3-flange-depth",
      "label": "S3-beam-3 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-3-web-height",
      "label": "S3-beam-3 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-4-flange-width",
      "label": "S3-beam-4 top flange width",
      "category": "source-dimension",
      "measured": 0.30480000000000007,
      "expected": 0.3048,
      "error": 5.551115123125783e-17,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-4-flange-depth",
      "label": "S3-beam-4 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-4-web-height",
      "label": "S3-beam-4 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-5-flange-width",
      "label": "S3-beam-5 top flange width",
      "category": "source-dimension",
      "measured": 0.30480000000000007,
      "expected": 0.3048,
      "error": 5.551115123125783e-17,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-5-flange-depth",
      "label": "S3-beam-5 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-5-web-height",
      "label": "S3-beam-5 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-6-flange-width",
      "label": "S3-beam-6 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-6-flange-depth",
      "label": "S3-beam-6 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-6-web-height",
      "label": "S3-beam-6 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-7-flange-width",
      "label": "S3-beam-7 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-7-flange-depth",
      "label": "S3-beam-7 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-7-web-height",
      "label": "S3-beam-7 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-8-flange-width",
      "label": "S3-beam-8 top flange width",
      "category": "source-dimension",
      "measured": 0.3048000000000002,
      "expected": 0.3048,
      "error": 1.6653345369377348e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-8-flange-depth",
      "label": "S3-beam-8 top flange exterior depth",
      "category": "source-dimension",
      "measured": 0.1269999999999989,
      "expected": 0.127,
      "error": 1.1102230246251565e-15,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "S3-beam-8-web-height",
      "label": "S3-beam-8 straight web height",
      "category": "source-dimension",
      "measured": 0.4317999999999991,
      "expected": 0.4318,
      "error": 9.43689570931383e-16,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-section"
      ]
    },
    {
      "id": "beam-net-concrete-volume",
      "label": "Inner beam volume against drawing concrete quantity",
      "category": "cross-view",
      "measured": 3.407657184672155,
      "expected": 3.3555463211520005,
      "error": 0.05211086352015437,
      "tolerance": null,
      "unit": "m3",
      "status": "unresolved",
      "evidence": [
        "beam-concrete-quantity-check",
        "beam-section",
        "beam-length"
      ],
      "reason": "Prismatic inner-beam envelope is 120.340 cubic feet; drawing lists 118.5 cubic feet. End regions, stubs, holes, chamfers and schedule applicability are not reconciled. This is not a validated concrete take-off or an accepted dimensional match."
    },
    {
      "id": "column-height-1",
      "label": "Pier 1 column from independent RL difference",
      "category": "cross-view",
      "measured": 6.096,
      "expected": 6.096,
      "error": 0.0,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "column-height-check"
      ]
    },
    {
      "id": "column-height-2",
      "label": "Pier 2 column from independent RL difference",
      "category": "cross-view",
      "measured": 6.096,
      "expected": 6.096,
      "error": 0.0,
      "tolerance": 0.0015875,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "column-height-check"
      ]
    },
    {
      "id": "rl-10.0000",
      "label": "Deck level at 10.00 ft from A",
      "category": "cross-view",
      "measured": 61.564348445316696,
      "expected": 61.56655200000001,
      "error": 0.0022035546833123476,
      "tolerance": 0.003316883239899478,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-20.0000",
      "label": "Deck level at 20.00 ft from A",
      "category": "cross-view",
      "measured": 61.49514123566594,
      "expected": 61.496448,
      "error": 0.0013067643340605173,
      "tolerance": 0.0034386294219988403,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-30.0000",
      "label": "Deck level at 30.00 ft from A",
      "category": "cross-view",
      "measured": 61.42902217191461,
      "expected": 61.429392,
      "error": 0.0003698280853896563,
      "tolerance": 0.0035132385462980868,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-40.0000",
      "label": "Deck level at 40.00 ft from A",
      "category": "cross-view",
      "measured": 61.36600317619462,
      "expected": 61.362336,
      "error": 0.0036671761946180936,
      "tolerance": 0.0035407106127972165,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-50.0000",
      "label": "Deck level at 50.00 ft from A",
      "category": "cross-view",
      "measured": 61.30607781682953,
      "expected": 61.307472,
      "error": 0.001394183170468466,
      "tolerance": 0.003521045621496231,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-61.6562",
      "label": "Deck level at 61.66 ft from A",
      "category": "cross-view",
      "measured": 61.24013397634489,
      "expected": 61.240415999999996,
      "error": 0.000282023655103103,
      "tolerance": 0.003438629421998841,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-71.6562",
      "label": "Deck level at 71.66 ft from A",
      "category": "cross-view",
      "measured": 61.18691323755181,
      "expected": 61.18555200000001,
      "error": 0.0013612375518050612,
      "tolerance": 0.003316883239899479,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-91.6562",
      "label": "Deck level at 91.66 ft from A",
      "category": "cross-view",
      "measured": 61.08975615154786,
      "expected": 61.088015999999996,
      "error": 0.0017401515478638885,
      "tolerance": 0.0033096333861037273,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-101.6562",
      "label": "Deck level at 101.66 ft from A",
      "category": "cross-view",
      "measured": 61.04582529479246,
      "expected": 61.045344,
      "error": 0.00048129479245773155,
      "tolerance": 0.0034250858047492464,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-111.6562",
      "label": "Deck level at 111.66 ft from A",
      "category": "cross-view",
      "measured": null,
      "expected": 61.005720000000004,
      "error": null,
      "tolerance": null,
      "unit": "m",
      "status": "unresolved",
      "evidence": [
        "deck-level-check"
      ],
      "reason": "Station falls in a physical slab joint; compiled surface is absent."
    },
    {
      "id": "rl-121.6562",
      "label": "Deck level at 121.66 ft from A",
      "category": "cross-view",
      "measured": 60.96724397844819,
      "expected": 60.96609600000001,
      "error": 0.0011479784481807087,
      "tolerance": 0.003517447739665662,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-131.6562",
      "label": "Deck level at 131.66 ft from A",
      "category": "cross-view",
      "measured": 60.93259351885932,
      "expected": 60.932568,
      "error": 2.5518859317230635e-05,
      "tolerance": 0.003494357255936558,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-141.6562",
      "label": "Deck level at 141.66 ft from A",
      "category": "cross-view",
      "measured": 60.90104472737736,
      "expected": 60.902088000000006,
      "error": 0.0010432726226454747,
      "tolerance": 0.0034250858047492464,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-151.6562",
      "label": "Deck level at 151.66 ft from A",
      "category": "cross-view",
      "measured": 60.87258797217473,
      "expected": 60.87160800000001,
      "error": 0.0009799721747185686,
      "tolerance": 0.0033096333861037273,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "rl-167.2083",
      "label": "Deck level at 167.21 ft from A",
      "category": "cross-view",
      "measured": 60.83448551674345,
      "expected": 60.835032000000005,
      "error": 0.0005464832565564848,
      "tolerance": 0.0035811610903814274,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "deck-level-check"
      ]
    },
    {
      "id": "deck-sag-curvature",
      "label": "Deck curvature against 12-chain sag and tangent grades",
      "category": "cross-view",
      "measured": 0.00033321387245615675,
      "expected": 0.0003364191505446576,
      "error": 3.2052780885008427e-06,
      "tolerance": 1.0672316310375122e-05,
      "unit": "1/m",
      "status": "pass",
      "evidence": [
        "vertical-curve-check",
        "deck-level-fit"
      ]
    },
    {
      "id": "bearing-gap-1",
      "label": "Pier 1 nominal bearing gap",
      "category": "connection",
      "measured": 0.012956707959837388,
      "expected": 0.0127,
      "error": 0.0002567079598373885,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-spacing",
        "pier-levels"
      ]
    },
    {
      "id": "bearing-gap-2",
      "label": "Pier 2 nominal bearing gap",
      "category": "connection",
      "measured": 0.012023076357259299,
      "expected": 0.0127,
      "error": 0.0006769236427407004,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-spacing",
        "pier-levels"
      ]
    },
    {
      "id": "abutment-bearing-gap-1",
      "label": "Abutment A bearing gap",
      "category": "connection",
      "measured": 0.006485567460309483,
      "expected": 0.0127,
      "error": 0.006214432539690517,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "beam-spacing",
        "abutment-seat-levels"
      ]
    },
    {
      "id": "abutment-bearing-gap-2",
      "label": "Abutment D bearing gap",
      "category": "connection",
      "measured": 0.015077870749490074,
      "expected": 0.0127,
      "error": 0.002377870749490075,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "beam-spacing",
        "abutment-seat-levels"
      ]
    },
    {
      "id": "cap-fall-1",
      "label": "Pier 1 longitudinal cap fall",
      "category": "source-dimension",
      "measured": 0.012700000000002376,
      "expected": 0.0127,
      "error": 2.3765711620882257e-15,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "pier-cap-longitudinal-fall"
      ]
    },
    {
      "id": "cap-fall-2",
      "label": "Pier 2 longitudinal cap fall",
      "category": "source-dimension",
      "measured": 0.009525000000003558,
      "expected": 0.009525,
      "error": 3.557917849228431e-15,
      "tolerance": 1e-08,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "pier-cap-longitudinal-fall"
      ]
    },
    {
      "id": "S1-bearing-1-near-contact",
      "label": "Beam 1 near bearing pad / A1-bearing-seat centre contact",
      "category": "connection",
      "measured": -0.0063323611111094635,
      "expected": 0,
      "error": 0.0063323611111094635,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": -0.0063323611111094635,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-1-far-contact",
      "label": "Beam 1 far bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.0010595782653446406,
      "expected": 0,
      "error": 0.0010595782653446406,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.0010595782653446406,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-2-near-contact",
      "label": "Beam 2 near bearing pad / A1-bearing-seat centre contact",
      "category": "connection",
      "measured": -0.006293051587302756,
      "expected": 0,
      "error": 0.006293051587302756,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": -0.006293051587302756,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-2-far-contact",
      "label": "Beam 2 far bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.0010595782653446406,
      "expected": 0,
      "error": 0.0010595782653446406,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.0010595782653446406,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-3-near-contact",
      "label": "Beam 3 near bearing pad / A1-bearing-seat centre contact",
      "category": "connection",
      "measured": -0.006253742063492496,
      "expected": 0,
      "error": 0.006253742063492496,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": -0.006253742063492496,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-3-far-contact",
      "label": "Beam 3 far bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.0010595782653481933,
      "expected": 0,
      "error": 0.0010595782653481933,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.0010595782653481933,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-4-near-contact",
      "label": "Beam 4 near bearing pad / A1-bearing-seat centre contact",
      "category": "connection",
      "measured": -0.006214432539685788,
      "expected": 0,
      "error": 0.006214432539685788,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": -0.006214432539685788,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-4-far-contact",
      "label": "Beam 4 far bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.001059578265341088,
      "expected": 0,
      "error": 0.001059578265341088,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.001059578265341088,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-5-near-contact",
      "label": "Beam 5 near bearing pad / A1-bearing-seat centre contact",
      "category": "connection",
      "measured": -0.006175123015871975,
      "expected": 0,
      "error": 0.006175123015871975,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": -0.006175123015871975,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-5-far-contact",
      "label": "Beam 5 far bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.0010595782653446406,
      "expected": 0,
      "error": 0.0010595782653446406,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.0010595782653446406,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-6-near-contact",
      "label": "Beam 6 near bearing pad / A1-bearing-seat centre contact",
      "category": "connection",
      "measured": -0.00613581349206882,
      "expected": 0,
      "error": 0.00613581349206882,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": -0.00613581349206882,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-6-far-contact",
      "label": "Beam 6 far bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.001059578265341088,
      "expected": 0,
      "error": 0.001059578265341088,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.001059578265341088,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-7-near-contact",
      "label": "Beam 7 near bearing pad / A1-bearing-seat centre contact",
      "category": "connection",
      "measured": -0.006096503968255007,
      "expected": 0,
      "error": 0.006096503968255007,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": -0.006096503968255007,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-7-far-contact",
      "label": "Beam 7 far bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.001059578265341088,
      "expected": 0,
      "error": 0.001059578265341088,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.001059578265341088,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-8-near-contact",
      "label": "Beam 8 near bearing pad / A1-bearing-seat centre contact",
      "category": "connection",
      "measured": -0.006057194444441194,
      "expected": 0,
      "error": 0.006057194444441194,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "conflict",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": -0.006057194444441194,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S1-bearing-8-far-contact",
      "label": "Beam 8 far bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.0010595782653446406,
      "expected": 0,
      "error": 0.0010595782653446406,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.0010595782653446406,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-1-near-contact",
      "label": "Beam 1 near bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.0004126922447298398,
      "expected": 0,
      "error": 0.0004126922447298398,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.0004126922447298398,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-1-far-contact",
      "label": "Beam 1 far bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.00013176209429133223,
      "expected": 0,
      "error": 0.00013176209429133223,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.00013176209429133223,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-2-near-contact",
      "label": "Beam 2 near bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.00041269224472628707,
      "expected": 0,
      "error": 0.00041269224472628707,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.00041269224472628707,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-2-far-contact",
      "label": "Beam 2 far bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.00013176209429133223,
      "expected": 0,
      "error": 0.00013176209429133223,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.00013176209429133223,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-3-near-contact",
      "label": "Beam 3 near bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.0004126922447298398,
      "expected": 0,
      "error": 0.0004126922447298398,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.0004126922447298398,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-3-far-contact",
      "label": "Beam 3 far bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.00013176209428777952,
      "expected": 0,
      "error": 0.00013176209428777952,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.00013176209428777952,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-4-near-contact",
      "label": "Beam 4 near bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.00041269224472628707,
      "expected": 0,
      "error": 0.00041269224472628707,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.00041269224472628707,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-4-far-contact",
      "label": "Beam 4 far bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.00013176209429488495,
      "expected": 0,
      "error": 0.00013176209429488495,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.00013176209429488495,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-5-near-contact",
      "label": "Beam 5 near bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.00041269224472628707,
      "expected": 0,
      "error": 0.00041269224472628707,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.00041269224472628707,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-5-far-contact",
      "label": "Beam 5 far bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.00013176209428777952,
      "expected": 0,
      "error": 0.00013176209428777952,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.00013176209428777952,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-6-near-contact",
      "label": "Beam 6 near bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.00041269224472273436,
      "expected": 0,
      "error": 0.00041269224472273436,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.00041269224472273436,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-6-far-contact",
      "label": "Beam 6 far bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.00013176209429133223,
      "expected": 0,
      "error": 0.00013176209429133223,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.00013176209429133223,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-7-near-contact",
      "label": "Beam 7 near bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.00041269224472628707,
      "expected": 0,
      "error": 0.00041269224472628707,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.00041269224472628707,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-7-far-contact",
      "label": "Beam 7 far bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.00013176209428777952,
      "expected": 0,
      "error": 0.00013176209428777952,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.00013176209428777952,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-8-near-contact",
      "label": "Beam 8 near bearing pad / P1-cap centre contact",
      "category": "connection",
      "measured": 0.00041269224472628707,
      "expected": 0,
      "error": 0.00041269224472628707,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": 0.00041269224472628707,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S2-bearing-8-far-contact",
      "label": "Beam 8 far bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.00013176209428777952,
      "expected": 0,
      "error": 0.00013176209428777952,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.00013176209428777952,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-1-near-contact",
      "label": "Beam 1 near bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.0002632306007939178,
      "expected": 0,
      "error": 0.0002632306007939178,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.0002632306007939178,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-1-far-contact",
      "label": "Beam 1 far bearing pad / A2-bearing-seat centre contact",
      "category": "connection",
      "measured": 0.002259942178071128,
      "expected": 0,
      "error": 0.002259942178071128,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": 0.002259942178071128,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-2-near-contact",
      "label": "Beam 2 near bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.0002632306007939178,
      "expected": 0,
      "error": 0.0002632306007939178,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.0002632306007939178,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-2-far-contact",
      "label": "Beam 2 far bearing pad / A2-bearing-seat centre contact",
      "category": "connection",
      "measured": 0.0022992517018707304,
      "expected": 0,
      "error": 0.0022992517018707304,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": 0.0022992517018707304,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-3-near-contact",
      "label": "Beam 3 near bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.0002632306007903651,
      "expected": 0,
      "error": 0.0002632306007903651,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.0002632306007903651,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-3-far-contact",
      "label": "Beam 3 far bearing pad / A2-bearing-seat centre contact",
      "category": "connection",
      "measured": 0.0023385612256845434,
      "expected": 0,
      "error": 0.0023385612256845434,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": 0.0023385612256845434,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-4-near-contact",
      "label": "Beam 4 near bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.0002632306007974705,
      "expected": 0,
      "error": 0.0002632306007974705,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.0002632306007974705,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-4-far-contact",
      "label": "Beam 4 far bearing pad / A2-bearing-seat centre contact",
      "category": "connection",
      "measured": 0.002377870749491251,
      "expected": 0,
      "error": 0.002377870749491251,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": 0.002377870749491251,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-5-near-contact",
      "label": "Beam 5 near bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.0002632306007939178,
      "expected": 0,
      "error": 0.0002632306007939178,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.0002632306007939178,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-5-far-contact",
      "label": "Beam 5 far bearing pad / A2-bearing-seat centre contact",
      "category": "connection",
      "measured": 0.0024171802732979586,
      "expected": 0,
      "error": 0.0024171802732979586,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": 0.0024171802732979586,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-6-near-contact",
      "label": "Beam 6 near bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.0002632306007974705,
      "expected": 0,
      "error": 0.0002632306007974705,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.0002632306007974705,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-6-far-contact",
      "label": "Beam 6 far bearing pad / A2-bearing-seat centre contact",
      "category": "connection",
      "measured": 0.0024564897971117716,
      "expected": 0,
      "error": 0.0024564897971117716,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": 0.0024564897971117716,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-7-near-contact",
      "label": "Beam 7 near bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.0002632306007974705,
      "expected": 0,
      "error": 0.0002632306007974705,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.0002632306007974705,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-7-far-contact",
      "label": "Beam 7 far bearing pad / A2-bearing-seat centre contact",
      "category": "connection",
      "measured": 0.0024957993209184792,
      "expected": 0,
      "error": 0.0024957993209184792,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": 0.0024957993209184792,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-8-near-contact",
      "label": "Beam 8 near bearing pad / P2-cap centre contact",
      "category": "connection",
      "measured": -0.0002632306007939178,
      "expected": 0,
      "error": 0.0002632306007939178,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "pier-levels",
        "pier-cap-longitudinal-fall"
      ],
      "signed_gap_m": -0.0002632306007939178,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    },
    {
      "id": "S3-bearing-8-far-contact",
      "label": "Beam 8 far bearing pad / A2-bearing-seat centre contact",
      "category": "connection",
      "measured": 0.002535108844725187,
      "expected": 0,
      "error": 0.002535108844725187,
      "tolerance": 0.003175,
      "unit": "m",
      "status": "pass",
      "evidence": [
        "bearing-pad-detail",
        "abutment-seat-levels"
      ],
      "signed_gap_m": 0.002535108844725187,
      "reason": "Positive gap means separation; negative means penetration. Centre contact only; edge contact and compression remain unresolved."
    }
  ],
  "counts": {
    "pass": 157,
    "unresolved": 2,
    "conflict": 10
  },
  "counts_by_category": {
    "connection": {
      "pass": 43,
      "conflict": 9
    },
    "cross-view": {
      "unresolved": 2,
      "pass": 16,
      "conflict": 1
    },
    "dimension": {
      "pass": 12
    },
    "source-dimension": {
      "pass": 86
    }
  },
  "independence_note": "Source-dimension checks compare compiled beam sections with their construction sheet; they are not independent extractions. Cross-view and connection checks test separate constraints.",
  "mesh_count": 91,
  "topology_pass": true,
  "omissions": [
    {
      "id": "S1-diaphragms",
      "label": "Diaphragms and linkage",
      "group": "S1",
      "reasons": [
        "Three intermediate beam diaphragm station axes transcribed separately from the ten-foot plan series; full section, outer stubs, end diaphragms and linkage geometry remain unresolved."
      ],
      "evidence": [
        "diaphragms",
        "beam-diaphragm-stations"
      ]
    },
    {
      "id": "S1-rail-left",
      "label": "Left steel handrail",
      "group": "S1",
      "reasons": [
        "Drawing handrail run split at support axes, excluding the two dimensioned end offsets. Panel/post schedules transcribed; member sections and mounting geometry remain unresolved."
      ],
      "evidence": [
        "rail-layout",
        "rail-section",
        "rail-panel-schedule",
        "rail-elevation-marks"
      ]
    },
    {
      "id": "S1-rail-right",
      "label": "Right steel handrail",
      "group": "S1",
      "reasons": [
        "Drawing handrail run split at support axes, excluding the two dimensioned end offsets. Panel/post schedules transcribed; member sections and mounting geometry remain unresolved."
      ],
      "evidence": [
        "rail-layout",
        "rail-section",
        "rail-panel-schedule",
        "rail-elevation-marks"
      ]
    },
    {
      "id": "S2-diaphragms",
      "label": "Diaphragms and linkage",
      "group": "S2",
      "reasons": [
        "Three intermediate beam diaphragm station axes transcribed separately from the ten-foot plan series; full section, outer stubs, end diaphragms and linkage geometry remain unresolved."
      ],
      "evidence": [
        "diaphragms",
        "beam-diaphragm-stations"
      ]
    },
    {
      "id": "S2-rail-left",
      "label": "Left steel handrail",
      "group": "S2",
      "reasons": [
        "Drawing handrail run split at support axes, excluding the two dimensioned end offsets. Panel/post schedules transcribed; member sections and mounting geometry remain unresolved."
      ],
      "evidence": [
        "rail-layout",
        "rail-section",
        "rail-panel-schedule",
        "rail-elevation-marks"
      ]
    },
    {
      "id": "S2-rail-right",
      "label": "Right steel handrail",
      "group": "S2",
      "reasons": [
        "Drawing handrail run split at support axes, excluding the two dimensioned end offsets. Panel/post schedules transcribed; member sections and mounting geometry remain unresolved."
      ],
      "evidence": [
        "rail-layout",
        "rail-section",
        "rail-panel-schedule",
        "rail-elevation-marks"
      ]
    },
    {
      "id": "S3-diaphragms",
      "label": "Diaphragms and linkage",
      "group": "S3",
      "reasons": [
        "Three intermediate beam diaphragm station axes transcribed separately from the ten-foot plan series; full section, outer stubs, end diaphragms and linkage geometry remain unresolved."
      ],
      "evidence": [
        "diaphragms",
        "beam-diaphragm-stations"
      ]
    },
    {
      "id": "S3-rail-left",
      "label": "Left steel handrail",
      "group": "S3",
      "reasons": [
        "Drawing handrail run split at support axes, excluding the two dimensioned end offsets. Panel/post schedules transcribed; member sections and mounting geometry remain unresolved."
      ],
      "evidence": [
        "rail-layout",
        "rail-section",
        "rail-panel-schedule",
        "rail-elevation-marks"
      ]
    },
    {
      "id": "S3-rail-right",
      "label": "Right steel handrail",
      "group": "S3",
      "reasons": [
        "Drawing handrail run split at support axes, excluding the two dimensioned end offsets. Panel/post schedules transcribed; member sections and mounting geometry remain unresolved."
      ],
      "evidence": [
        "rail-layout",
        "rail-section",
        "rail-panel-schedule",
        "rail-elevation-marks"
      ]
    },
    {
      "id": "A1-abutment",
      "label": "Abutment A",
      "group": "A1",
      "reasons": [
        "Central bearing-seat block compiled separately. Two cylinder foundations, wingwalls and upper stepped backwall remain unresolved pending exterior dimensions and revised RL reconciliation."
      ],
      "evidence": [
        "abutment-caps",
        "abutment-foundations",
        "abutment-section"
      ]
    },
    {
      "id": "AP1-approach",
      "label": "Approach 1",
      "group": "AP1",
      "reasons": [
        "Current approach assets are not established by the original construction drawings."
      ],
      "evidence": [
        "approaches"
      ]
    },
    {
      "id": "A2-abutment",
      "label": "Abutment D",
      "group": "A2",
      "reasons": [
        "Central bearing-seat block compiled separately. Two cylinder foundations, wingwalls and upper stepped backwall remain unresolved pending exterior dimensions and revised RL reconciliation."
      ],
      "evidence": [
        "abutment-caps",
        "abutment-foundations",
        "abutment-section"
      ]
    },
    {
      "id": "AP2-approach",
      "label": "Approach 2",
      "group": "AP2",
      "reasons": [
        "Current approach assets are not established by the original construction drawings."
      ],
      "evidence": [
        "approaches"
      ]
    }
  ],
  "envelopes": [
    "S1-beam-1",
    "S1-bearing-1-near",
    "S1-bearing-1-far",
    "S1-beam-2",
    "S1-bearing-2-near",
    "S1-bearing-2-far",
    "S1-beam-3",
    "S1-bearing-3-near",
    "S1-bearing-3-far",
    "S1-beam-4",
    "S1-bearing-4-near",
    "S1-bearing-4-far",
    "S1-beam-5",
    "S1-bearing-5-near",
    "S1-bearing-5-far",
    "S1-beam-6",
    "S1-bearing-6-near",
    "S1-bearing-6-far",
    "S1-beam-7",
    "S1-bearing-7-near",
    "S1-bearing-7-far",
    "S1-beam-8",
    "S1-bearing-8-near",
    "S1-bearing-8-far",
    "S1-footpath",
    "S1-kerb",
    "S2-beam-1",
    "S2-bearing-1-near",
    "S2-bearing-1-far",
    "S2-beam-2",
    "S2-bearing-2-near",
    "S2-bearing-2-far",
    "S2-beam-3",
    "S2-bearing-3-near",
    "S2-bearing-3-far",
    "S2-beam-4",
    "S2-bearing-4-near",
    "S2-bearing-4-far",
    "S2-beam-5",
    "S2-bearing-5-near",
    "S2-bearing-5-far",
    "S2-beam-6",
    "S2-bearing-6-near",
    "S2-bearing-6-far",
    "S2-beam-7",
    "S2-bearing-7-near",
    "S2-bearing-7-far",
    "S2-beam-8",
    "S2-bearing-8-near",
    "S2-bearing-8-far",
    "S2-footpath",
    "S2-kerb",
    "S3-beam-1",
    "S3-bearing-1-near",
    "S3-bearing-1-far",
    "S3-beam-2",
    "S3-bearing-2-near",
    "S3-bearing-2-far",
    "S3-beam-3",
    "S3-bearing-3-near",
    "S3-bearing-3-far",
    "S3-beam-4",
    "S3-bearing-4-near",
    "S3-bearing-4-far",
    "S3-beam-5",
    "S3-bearing-5-near",
    "S3-bearing-5-far",
    "S3-beam-6",
    "S3-bearing-6-near",
    "S3-bearing-6-far",
    "S3-beam-7",
    "S3-bearing-7-near",
    "S3-bearing-7-far",
    "S3-beam-8",
    "S3-bearing-8-near",
    "S3-bearing-8-far",
    "S3-footpath",
    "S3-kerb",
    "P1-foundation",
    "P1-base",
    "P2-foundation",
    "P2-base"
  ],
  "source_feature_coverage": {
    "complete": false,
    "features": [
      {
        "id": "deck-system",
        "label": "Deck surfaces and transverse joints",
        "evidence": [
          "section-layout",
          "deck-overhang"
        ],
        "elements": [
          "S1-deck",
          "S2-deck",
          "S3-deck"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "beam-sections",
        "label": "Beam sections, end blocks, stubs and camber",
        "evidence": [
          "beam-section",
          "beam-length"
        ],
        "elements": [
          "S1-beam-1",
          "S1-beam-2",
          "S1-beam-3",
          "S1-beam-4",
          "S1-beam-5",
          "S1-beam-6",
          "S1-beam-7",
          "S1-beam-8",
          "S2-beam-1",
          "S2-beam-2",
          "S2-beam-3",
          "S2-beam-4",
          "S2-beam-5",
          "S2-beam-6",
          "S2-beam-7",
          "S2-beam-8",
          "S3-beam-1",
          "S3-beam-2",
          "S3-beam-3",
          "S3-beam-4",
          "S3-beam-5",
          "S3-beam-6",
          "S3-beam-7",
          "S3-beam-8"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "bearings",
        "label": "Bearing pads, dowel openings and contacts",
        "evidence": [
          "bearing-pad-detail"
        ],
        "elements": [
          "S1-bearing-1-near",
          "S1-bearing-1-far",
          "S1-bearing-2-near",
          "S1-bearing-2-far",
          "S1-bearing-3-near",
          "S1-bearing-3-far",
          "S1-bearing-4-near",
          "S1-bearing-4-far",
          "S1-bearing-5-near",
          "S1-bearing-5-far",
          "S1-bearing-6-near",
          "S1-bearing-6-far",
          "S1-bearing-7-near",
          "S1-bearing-7-far",
          "S1-bearing-8-near",
          "S1-bearing-8-far",
          "S2-bearing-1-near",
          "S2-bearing-1-far",
          "S2-bearing-2-near",
          "S2-bearing-2-far",
          "S2-bearing-3-near",
          "S2-bearing-3-far",
          "S2-bearing-4-near",
          "S2-bearing-4-far",
          "S2-bearing-5-near",
          "S2-bearing-5-far",
          "S2-bearing-6-near",
          "S2-bearing-6-far",
          "S2-bearing-7-near",
          "S2-bearing-7-far",
          "S2-bearing-8-near",
          "S2-bearing-8-far",
          "S3-bearing-1-near",
          "S3-bearing-1-far",
          "S3-bearing-2-near",
          "S3-bearing-2-far",
          "S3-bearing-3-near",
          "S3-bearing-3-far",
          "S3-bearing-4-near",
          "S3-bearing-4-far",
          "S3-bearing-5-near",
          "S3-bearing-5-far",
          "S3-bearing-6-near",
          "S3-bearing-6-far",
          "S3-bearing-7-near",
          "S3-bearing-7-far",
          "S3-bearing-8-near",
          "S3-bearing-8-far"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "pier-caps",
        "label": "Pier caps, falls, dowels and chamfers",
        "evidence": [
          "pier-cap",
          "pier-cap-longitudinal-fall"
        ],
        "elements": [
          "P1-cap",
          "P2-cap"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "pier-columns",
        "label": "Pier columns",
        "evidence": [
          "pier-columns"
        ],
        "elements": [
          "P1-column",
          "P2-column"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "foundations",
        "label": "Pier foundations and amended Pier C base",
        "evidence": [
          "pier-b-foundation",
          "pier-c-amendment"
        ],
        "elements": [
          "P1-foundation",
          "P1-base",
          "P2-foundation",
          "P2-base"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "abutments",
        "label": "Abutment seats, upper walls, wings and cylinders",
        "evidence": [
          "abutment-section",
          "abutment-foundations"
        ],
        "elements": [
          "A1-bearing-seat",
          "A2-bearing-seat",
          "A1-abutment",
          "A2-abutment"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "handrails",
        "label": "Installed rail panels, posts and connections",
        "evidence": [
          "rail-section",
          "rail-panel-member-section"
        ],
        "elements": [
          "S1-rail-left",
          "S1-rail-right",
          "S2-rail-left",
          "S2-rail-right",
          "S3-rail-left",
          "S3-rail-right"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "footpaths",
        "label": "Footpath section, ducts, lips and voids",
        "evidence": [
          "kerb-section",
          "section-layout"
        ],
        "elements": [
          "S1-footpath",
          "S2-footpath",
          "S3-footpath"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "kerbs",
        "label": "Kerb sections, joints and mounting details",
        "evidence": [
          "kerb-section"
        ],
        "elements": [
          "S1-kerb",
          "S2-kerb",
          "S3-kerb"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "diaphragms",
        "label": "Diaphragms, linkage and infill interfaces",
        "evidence": [
          "diaphragms",
          "beam-diaphragm-stations"
        ],
        "elements": [
          "S1-diaphragms",
          "S2-diaphragms",
          "S3-diaphragms"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      },
      {
        "id": "approaches",
        "label": "Approach geometry and source limits",
        "evidence": [
          "approaches"
        ],
        "elements": [
          "AP1-approach",
          "AP2-approach"
        ],
        "review": "unreviewed",
        "status": "partial",
        "reason": "Source family registered; complete dimensions, details and placement have not all been accepted.",
        "complete": false
      }
    ],
    "unreviewed_sheets": [
      "sheet-1",
      "sheet-2",
      "sheet-3",
      "sheet-4",
      "sheet-5",
      "sheet-6",
      "sheet-7",
      "sheet-8"
    ],
    "reason": "Discovery is a curated seed; feature completeness and sheet coverage require separate acceptance."
  },
  "coverage_complete": false,
  "acceptance": {
    "source_review": "unreviewed",
    "as_built_accuracy": "not established",
    "limits": "Printed-dimension agreement, mesh integrity and coverage are separate gates. No geometry accuracy claim while source conflicts or unresolved geometry remain."
  }
}